YITAMOTOR Power Heated Towing Mirrors for Dodge Ram 1500/2500/3500 (2009-2018) - Chrome LED Turn Signal with Puddle Lamp | Perfect for Towing, Camping & Off-Road Adventures

I have a 2010 Dodge Ram 1500 5.7 Hemi with the Big Horn package.These mirror are good quality and easy to install for the most part. I can't say 15 minutes each like the other review but I am not that mechanical either. By the time I cut the front bolt and figured out how to pull the panels off each door I probably had one hour and ten minutes for both.Pro'sNice looking mirrors (Chrome really sets them off)Blinkers, puddle lights, and power adjustment all worked (won't know about the heat for sure till I need it this winter)Fairly easy to installThe second mirror to view your blind spot is a plus.No programming required as long as your original truck mirrors had all these features.No vibrations or shaking going down the road as far as I can tell (solid mirrors).ConsOnly I small issue and that is they seem to whistle a little going done the road but I can get use to that based on price.You have to cut the front bolt to size or it will scratch your paint. Not sure why the manufacturer didn't put a shorter bolt there. I think all Dodges this mirror fits would need this modification.Here's the step's I took to install.1) Remove door panel and wiring from switches (There's a good A1 Auto on YouTube for removing the door panels)2) Remove the old mirror and wiring (I had someone holding the mirror during removal and assembly to make things easier).3) Cut the front bolt on the new mirror to 5/8 " length with a hack saw. I left all the packaging on while doing this so the mirror didn't get banged up. If you don't do this it will damage the paint inside your door.4) Mount the mirror and connect the mirror wires into the outlet on the door. I believe the black connector from the new mirror went to outlet 2 and white connector to outlet 1 on my door.5) Test functionality to make sure everything works.6) Put the door panel back on and you are good to go.Overall really nice mirrors for the price. The whistle noise is the only issue I have and I can live with that since its not very loud.8-31-18 *********(*When hopefully this helps someone else. My passenger mirror got clipped by another truck and peeled back some black plastic. They didn't even bother to tell me. Bummer. Mirror still works just cosmetic. Not the sellers fault. Going Ahead I advise you to push in your mirror in public places :(Mirror looks like OEM and was easy to install. There is a slight rattle from inside the mirror when I manually close it and open it. Also, would be great to pay a little more to be able to purchase 1 mirror and not a pair. Fortunately I was able to sell the passenger side mirror to someone who needed one.When I opened the box I was impressed with the packaging, very sturdy and well-protected. The quality of the construction looks good, the chrome seems as good as stock, and the plastic is as sturdy. The mirrors are not as optically correct as stock - there's a little waviness in the glass, but it isn't much of a distraction for me.You will want to cut the front stud before installation. I spun the nut down to the bottom of the threads then cut the stud to a little more than half the original length. Removing the nut chased the threads at the cut, making it easy to thread the nut back on during install.I noted a significant difference in the number of wires between the stock mirror and this one. Stock has a lot more wires. After installation I noted that the memory function doesn't work with these new mirrors. Bummer. Minus one star. And I'm not sure yet if the defrost function works.Installed I did notice more vibration in the glass than with the stock mirrors. Again, it's not terrible, it doesn't interfere with being able to see behind me, but I do notice it.So between having to cut one mounting stud, the lack of memory, the glass distortion, and the vibration I have to deduct 2 stars. However, I do still consider these mirrors to be a good value, and I'd buy them again if needed.So to start with the bad. The studs are way too long and will scratch the paint unless trimmed down. So get the dremel ready. The Right mirror already decided to break a piece of itself and a random plastic fell out but the mirror doesn’t look affected. The good is that they look amazing and completely oem. The lights work and so does the temp sensor. I Give it a 4 even though it truly deserves a 3, but the look adds that extra star. Worth it unless you want to spend 150+ per mirror from anywhere else.Edit 9/3/20My driver mirror has condensation inside the turning signal lense. This is really disappointing as the right side has held up. Unfortunately I can no longer recommend this item.Edit 9/25/20I contacted the seller and within a day a new mirror was shipped. Customer service was amazing and the new mirror works great. Back to 4 stars.THE LIGHTS DONT WORK ON MIRRORS, I HAVE THEM ON THE TRUCK, MINE IS A 2013. DO YOU HAVE ANYIDEA ON THE LIGHTS?? I AM HOPING THE HEATED MIRRORS WORK, IF IT GETS COLD THEN I WILL NO. IF THEY DONT I WILL RETURN THEM...Very nice product.Pretty happy with these, will be installing them tomorrow so I cant speak on that. But if they fit like **** or the lights dont work i may be returning to trash talk. Otherwise it was packaged for safety 100 percent, chrome looks good plastic looks great. I still have my 8 year old stock mirrors that are obviously warn the flip and fold in are soft where as these are nice and stiff they feel solid and brand new. Would give 5 stars but Idk how they fit and if they work.Received these yesterday, took about 45 minutes to install. I opted to get the brackets for them (regular mirrors don't have one) and just used some nuts/bolts that I had laying around. They came in some the best packaging I've ever seen. Everything works as it should. I gave them 4 Stars because I just got them. I'll give another review in a month and if all is good will give it the 5th Star.The goodsEverything looks good, and works as it shouldIssuesHave to cut about 1/4" off innermost boltAndInsulation foam is not as good as original, if you can use the original foam. Or you could get some wind noise.They work, and they are solid and would recommend if you are trying to save money on an older model vehicle.Installed on 2013 Ram BighornDecent quality... only issue is one wave in the drivers side mirror. Installation was easy. The stud closest to the front of the truck does need to be cut off. Just cut right where the threads start and your will be ok. It's about 4mm too long.I took the bolt out of the old mirror and put it in the new one. Noticed some corrosion inside sprayed it with crown rust controle good as new. I found the old nuts were better too.Fonctionne très bien mais faut aller chez un concessionnaires pour activer les lumières, ce n’est vraiment pas dispendieuxParfait, pour le prix c’est excellent.Installé sur un Ram 1500 SXT 2017.